How To Mortise Hinges By Hand for a Perfect Fit

How To Mortise Hinges By Hand for a Perfect Fit

More details in the website article: https://ibuildit.ca/tips/cutting-mort… How to make your chisels RAZOR sharp: https://youtu.be/98czRMIAhd8 ▶️ Project plans for sale: https://ibuildit.ca/plans/ ▶️Support the work I do on Locals: https://ibuildit.locals.com/ ▶️ Patreon: https://www.patreon.com/user?u=865843&ty=h ▶️ Join my Makers Mob for detailed build…

They Shut Off My Lights so I Made This - Fancy Wooden Candelabra

They Shut Off My Lights so I Made This – Fancy Wooden Candelabra

When the lights go out there’s nothing more handy than something to hold the candles, so why not do it first class? This candelabra is made from solid maple and Baltic birch plywood (for the arms) and holds 5 candles.…

Making a 5 Board Solid Wood TV Stand - Modern Design - Woodworking

Making a 5 Board Solid Wood TV Stand – Modern Design – Woodworking

I say “TV stand”, but my TV is mounted on the wall and I’m using this for my audio equipment only. In any case, it would make a very capable TV stand – the top is solid 1″ thick ash…

Why Didn't I Think Of This Before? Genius Idea But Will it Work?

Why Didn’t I Think Of This Before? Genius Idea But Will it Work?

Thanks again to Drew for the AWESOME push stick! Check out his YouTube channel: https://www.youtube.com/c/FishersShop How many times have I taped or clamped a full sheet of sandpaper down on my bench only to have whatever I’m sanding catch on…

How To Make Raised Panel Doors using Only a Table Saw

How To Make Raised Panel Doors using Only a Table Saw

Cope and stick doors are usually done with a shaper or router bit set, but in this video I show how to do it using just the table saw. Not the fastest or easiest, but certainly doable and the results…

Sharpening Table Saw Blades On The Table Saw #shorts

Sharpening Table Saw Blades On The Table Saw #shorts

#shorts I needed to sharpen two of my older thin kerf blades and used a simple plywood jig I made to do that on my table saw. The diamond grinding wheel is specially made for blade sharpening and it only…

Perfect Edge Sanding on the Table Saw - Easy To Make!

Perfect Edge Sanding on the Table Saw – Easy To Make!

Yet another edge sanding solution for the cash-strapped home woodworker. Make it from scrap plywood and a low cost sanding belt. The sanding belt is 21″ x 3″ and fits on a ~6-5/8″ wheel. The only tricky part is being…

The Corner Clamp to End All Corner Clamps - How I Made it - Free Plans!

The Corner Clamp to End All Corner Clamps – How I Made it – Free Plans!

Get free plans for this project here: https://ibuildit.ca/projects/how-to-make-a-corner-clamp/ Unlike most of the ones you can buy, this one puts the clamping force exactly where it’s needed: across the miter, pushing it tightly closed. And you can make it in an…

Making Great Looking Cabinet Doors From Rough Lumber - Woodworking

Making Great Looking Cabinet Doors From Rough Lumber – Woodworking

I made these in 2018 using a “table saw” made from a circular saw mounted under a piece of 1/2″ plywood. I used some interesting techniques to build these doors, in particular the way I assembled the frames. This was…

Not The First Desk with a Computer Inside, but Maybe the Coolest Looking - Full Build

Not The First Desk with a Computer Inside, but Maybe the Coolest Looking – Full Build

I needed a computer upgrade for video editing, so I figured I’d go the full distance and build a new neat looking desk to put it in. I say desk, but it’s really more like a table to put the…